Top 10 Resin 3D Printers in 2027

The Saturn 4 Ultra 16K pairs 14 × 19 μm XY resolution (15120 × 6230) with a 211.68 × 118.37 × 220 mm build volume and tilt release at up to 150 mm/h. Smart tank heating holds resin at 30 °C, an AI camera with light watches the print, and it connects over USB and built-in Wi-Fi, for $499.00.

The Revo 16K has the same 14 × 19 μm XY resolution (15120 × 6230) in a 211.68 × 118.37 × 235 mm build volume, a 30°C chamber heater, dual smart failure detection and an aerospace-grade 6000-series aluminum frame. Phrozen rates the LCD at 2,000+ hours and lists speed up to 676 layers/hr, for $720.00.

The Photon Mono M7 Pro has a 14K screen with 16.8 × 24.8 μm XY resolution and a 223 × 126 × 230 mm build volume. Anycubic lists up to 170 mm/h with high-speed resin at 0.1 mm, auto resin refill and withdrawal, failed print detection and a heated resin vat, for $489.00.

The Photon P1 has a 14K screen (13312 × 5120, 16.8 × 24.8 μm) and a 223 × 126 × 230 mm (6.5 L) build volume. A thermal-controlled resin vat heats up to 40°C and Anycubic says it handles 8000cps resin; a dual-color and dual-material printing platform is available. It starts at $599.00.

The Saturn 4 Ultra has a 218.88 × 122.88 × 220 mm build volume, 19 × 24 μm XY resolution (11520 × 5120), a COB light source with Fresnel lens and tilt release at up to 150 mm/h. It connects over USB and Wi-Fi and costs $399.00.

The Mars 5 Ultra has a 7-inch 9K mono LCD with 18 μm XY resolution (8520 × 4320), a 153.36 × 77.76 × 165 mm build volume and speeds up to 150 mm/h. It adds an AI camera and Wi-Fi cluster printing for $279.00.

The Photon Mono 4 Ultra has a 7-inch 10K screen (9024 × 5120) with 17 × 17 μm square pixels, a 153.4 × 87 × 165 mm (2.2 L) build volume and up to 120 mm/h with High Speed Resin 2.0 at 0.1 mm. It costs $299.00.

The Sonic Mighty 8K has a 10.1-inch 8K mono LCD with 28 µm XY resolution, a 218 × 123 × 235 mm build volume and dual linear rails. Phrozen lists a max speed of 70 mm/hr, and it costs $410.00.

The Photon Mono M7 Max has a 298 × 164 × 300 mm (14.7 L) build volume on a 13.6-inch 7K screen with 46 × 46 μm XY resolution. Anycubic lists up to 86 mm/h with high-speed resin at 0.1 mm, auto resin recycling and dual linear rails, for $749.00.

The Form 4 is a masked stereolithography printer with a 20.0 × 12.5 × 21.0 cm build volume and a max print speed of 100 mm/hour. Formlabs offers 23 materials plus third-party materials in Open Material Mode, a 5MP camera and 25–200 µm layer thickness. It starts at $2,625 for the Basic package.